EasyManua.ls Logo

Lukas HT 90 - 7 Dismantling the Equipment; Deactivation Following Operation; Door Opener; Hand Pump; Hoses

Lukas HT 90
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
7. Dismantling the equipment /
deactivation following operation
7.1 Door opener
Attheendofthework,thedooropenersmustberetracteduntiltheyreachtheendposition.
Thisrelieveshydraulicandmechanicalstressonthedevice.
NOTE:
When door openers are in storage, uctuations in ambient temperature can
cause the pistons to move slightly. This physical phenomenon is due to the
di󰀨eringexpansionoftheenclosedhydraulicuid.
7.2 Hand pump
7.3 Hoses
Aftercompletingthework,thehandpumpmustbedepressurised.
Firstdecouplethepressurehose,thenthereturnhoseasdescribedinchapter“Connecting
theequipment”.
Makesurethatyoureplacethedustprotectioncapsonthecoupling.