Lukas LC 99 - Connecting the Device; Connection Safety; Quick-Disconnect Coupling

12
5. Connecting the device
5.1 General information
5.2 Coupling of (Flat-Face) quick-disconnect coupling
WARNING / CAUTION / ATTENTION!
Priortoconnectingthedevice,ensurethatall the components being used are
suitable for the maximum operating pressure of the pump unit.Incaseof
doubt,youmust contact LUKASdirectly.
The device is connected to the hand pump without the risk of connection error using
Flat-Facequick-disconnectcouplinghalves(femaleandmale).
NOTE:
Thedevicecanonlybedecoupledwhenthehosesaredepressurised.
AFlat-Facecouplingismountedonthedevicewhichisconnectedtothehandpumpviaa
hoseline.Thehoseisequippedwithcouplingssothatitcanbeconnectedwithouterror.
Toconnectthedevice,pushthemaleintothefemalecounterpart.Tolock,turnthesleeveof
themalecounterpartby90°.
Todecouple,turnthesleeveofthemalecounterpartby90°againandthenpullback.