Lukas S 312 E2 - Operating the Star Grip

13
Procedure:
 1. Unplugthepowersupply(whereused)fromthemains.
 2. Fullypressdownthetwounlockingbuttonsandcarefullypullthebatteryorpower
supplyoutofthedevice.
Do not use force!
 3. Thebatterycannowberechargedinthecharger(pleasetakenoteoftheseparate
operatinginstructionsforthechargerandthebatteriestobeused);alternatively,the
powersupplycanbereplaced.
 4. InserttherechargedornewbatteryintotheeDRAULICdeviceuntilitreachesthe
stop.Thebatteryorpowersupplywillbeautomaticallylockedwhencorrectlyoper-
ated.
Connectionslot
Open the device ( ):
Turnthestargripinthedirectionofthecorrespondingsymbol
(open)andholditinthisposition.
Close the device ( ):
Turnthestargripinthedirectionofthecorrespondingsymbol
(close)andholditinthisposition.
"Dead-man’s" function:
Followingrelease,thestargripautomaticallyreturnstothe
centralposition,fullyguaranteeingloadretention.
5.2 Operating the star grip
(alsoseechapteron"Operatingmovementcontrol")