Lukas S 312 E2 - Technical Data

28
11. Technical data
NOTE:
Thefollowingtablescontainonlythetechnicaldatanecessaryforoperationand
storage.
FurtherinformationaboutyourdeviceisavailabledirectlyfromLUKAS.
Sinceallvaluesaresubjecttotolerances,minordi󰀨erencesmayoccurbetweenthedataon
yourequipmentandthedatainthefollowingtables.
The values may also di󰀨er because of reading inaccuracies and/or tolerances in the
measuringequipmentused.
Operating pressure: S312E2: 70MPa
   S377E2: 70MPa
   S700E2: 80MPa
   S788E2: 70MPa
ContactanauthorisedLUKASdealerortheLUKASCustomerServiceDepartmentdirectly
ifthemalfunctionscannotberectied.
TheaddressfortheLUKASCustomerServicedepartmentis:
LUKAS Hydraulik GmbH
Weinstraße39, D-91058Erlangen
Tel.: 0049(0)9131/698-348
Fax.: 0049(0)9131/698-353
http://www.lukas.com