EasyManua.ls Logo

Lukas S 700 E2 - 6.2 Cutting Procedure and Angles

Lukas S 700 E2
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
It is strictly prohibited to reach into the path of the
rescue device (e.g. between the blade arms and the
material/object to which the force is to be applied)!
CAUTION / PLEASE NOTE!
The strong e󰀨ect of the force of the rescue equipment during operation could
causepiecesofthevehicle tobreak o󰀨 ory o󰀨, posinga dangerto persons.
Those not involved in the rescue operation should therefore keep at a safe
distance appropriate to th
esituation.Any trappedor enclosedpersons must
beprotected.
6.2 Cutting
Thebladesshouldbepositionedata90°angletotheobjecttobecut,ifpossible.
RIGHT
WRONG
12
9
3
15°
15°
90°
Highercuttingcapacitiescanbeachievedbycuttingascloseaspossibletotheblade’spivotpoint.
RIGHT
WRONG

Related product manuals