Lukas S 700 E2 - 9.2 Preventive Service and Care Instructions; 9.3 Repairs: Replacing Components

21
9.2 Preventive service
9.2.1 Care instructions
Theoutside ofthedevice shouldbecleaned withadamp clothfromtime totime(not the
electrical contacts in the connection slot, on the battery and on the power supply
).In
addition,themetalsurfacesaretocoatedwithasuitablemediumtocounteractcorrosion(not
the electrical contacts in the connection slot, on the battery
andonthepowersupply).
(Incaseofdoubt,contactyourauthorizedLUKASdealerorLUKASdirectly!)
9.2.2 Function and load test
Ifthereisanydoubtregardingthesafetyorreliabilityofadevice,afunctionandstresstest
mustalsobeperformed.
LUKASo󰀨ersappropriatetestequipmentforthis.
9.3.1 Replacing the blade, protective cover and hand grip of the cutter
S 700 E2, S 788 E2, S 312 E2 and S 377 E2
9.3 Repairs
Components to be
replaced
Required work steps
Protectivecover 1.,2.and7.
Pivotbolt 1.-4.and7.
Handle 1.-6.and7.
Blade 1.-5.and7.