Lumel N31U - Registers 7600 - 7668 and 7200 - 7336

36
N31U User manual
5.5.4.4 Registers 7600 – 7668 and 7200 – 7336
The 32-bit and the corresponding 16-bit registers with the conguration para-
meters. The address for 32-bit variables was entered in the address eld, while
the address for accessing data stored in two successive 16-bit registers was
entered in a bracket.
Adress
(32-bit o-
at registers)
Adress
(value in 2
16-bit regi-
sters)
Permissible
values
Default Description
Minimum and maximum displayed value
7600 7200 -99999...999999 -99999 Display narrowing lower threshold. If the value to be displayed is
below the threshold, the lower limit symbol is displayed.
7601 7202 -99999...999999 999999 Display narrowing upper threshold. If the value to be displayed is
above the threshold, the upper limit symbol is displayed.
Kompensacja ręczną
7602 7204 -30...70 0 Value of a manual compensation. The value in the register deter-
mines the resistance of connection cables for the measurements in
the resistance measurement ranges or determines the temperature
of the terminals for temperature measurements using the thermoco-
uple sensors.
Alarm – progi zmiany stanu alarmu
7603 7206 -99999...999999 10 Alarm – alarm state change lower threshold.
7604 7208 -99999...999999 20 Alarm – alarm state change upper threshold.
Points of the individual characteristic
Xn - value of the measuring quantity for which Yn value will be displayed on the display
Yn - displayed value for the measuring value Xn, where n - point number
7605 7210 -99999...999999 0 X1
7606 7212 -99999...999999 0 Y1
7607 7214 -99999...999999 1 X2
7608 7216 -99999...999999 1 Y2
7609 7218 -99999...999999 2 X3
7610 7220 -99999...999999 2 Y3
7611 7222 -99999...999999 3 X4
7612 7224 -99999...999999 3 Y4
7613 7226 -99999...999999 4 X5
7614 7228 -99999...999999 4 Y5
7615 7230 -99999...999999 5 X6
7616 7232 -99999...999999 5 Y6
7617 7234 -99999...999999 6 X7
7618 7236 -99999...999999 6 Y7