46133
Backlit ON/OFF
This address is used to turn On or turn Off the backlit.
1: Backlit On
0: Backlit Off
46135
Contrast
46137 User Assignable
Screen On/Off
This address is used to activate or deactivate the User Assignable
Screen feature.
0: Deactivate
1 to 10: Corresponding number of user assignable screens.
This address is used to change the contrast of the display. The options availabe
are 1 to 4, in increasing order of contrast.
46139 to
46157
User Screens 1
to 10
These addresses are used to assign the screen numbers to user screens 1 to 10
respectively. Refer to TABLE 11 and 12 for screen numbers.
46179 Model Number
This address is read only and displays the model number of the meter.
46181
Version Number
This address is read only and displays the version number of the meter.
46177 Serial Number
This address is read only and displays the serial number of the meter.
46129 RTC Complete
Time
This address is used to read and write complete time in “hh.mm” format from RTC.
46131 RTC Day of
week.
This address is used to read the day of the week for the present date with following
values: 1:Sunday 2:Monday 3:Tuesday 4:Wednesday
5:Thursday 6:Friday 7:Saturday
46127 RTC Complete
Date
This address is used to read and write full date in “ddmmyy” format from RTC.
Address Parameter Description
46185 Event Based
Datalog Select
This register is used to enable or disable event based datalogging.
0: Disabled
1: Enabled
46187 Time Based
Datalog Select
This register is used to enable or disable time based datalogging.
0: Disabled
1: Enabled
46183
Restart Meter
This register can be used to restart the meter by writing 1.
30
To Next Page
Loading...
Need help?
General
