Lumens LC200 User Manual

24
5.2.8 Backup Setting
LC200 provides auto backup service which can upload videos to a designated space
automatically. You can set up upload destination and test the connection here.
No
Item
Function Descriptions
1
Upload Setting
 Auto upload: Disable / Upload right after recording completes /
Upload periodically
 Mode: FTP / NAS / SFTP / Panopto / Kaltura FTP / Kaltura SFTP /
Kaltura HTTPS / Opencast HTTP / Opencast HTTPS
<Note> Select NAS. Please go to Storage Settings > NAS Setting to
enable mounting and related settings
 Connection Test: Click [Connection Test] to test if a
connection can be created with the current setting
<Remark> Please refer to the videos of How-to series on Lumens™
website and YouTube channels for related application settings
5.2.9 About
LC200 Device-related Information: Firmware version, device serial number, and
technical support link

Lumens LC200 Specifications

General

Internal	No
Product color	Black
LED indicators	Yes
Number of persons	- person(s)
Supported aspect ratios	16:9
Analog signal format system	-
HDMI in	4
USB version	3.2 Gen 1 (3.1 Gen 1)
Audio (L/R) out	1
Headphone outputs	0
USB connector type	USB Type-A
HDMI ports quantity	6
Number of HDMI outputs	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
AC adapter output current	2 A
AC adapter output voltage	12 V
Maximum frame rate	60 fps
Supported resolutions	640 x 480, 1280 x 720, 1920 x 1080
Supported video modes	480p, 720p, 1080p
Megapixel	- MP

Weight and Dimensions

Depth	122.5 mm
Width	431 mm
Height	44.3 mm
Weight	1200 g