Lumens VC-A71PN

33
6.2.4 Setting - System Setting
<Remark> The figure is an example of VC-A71P. VC-A71PN does not support Preview Window
No
Item
Function Descriptions
1
Resolution
Set the resolution of the camera, resolutions supported by the camera
are as follows:
3840 x 2160 59.94 / 50 / 29.97 / 25 fps
1080P 59.94 / 50 / 29.97 / 25
720P 59.94 / 50 / 29.97 / 25
1080i 59.94/50
After switching to the resolution, the camera will restart. Please refresh
the browser
<Remark>VC-A71PN does not support 720p 29.97/25 fps resolutions
<Remark>1080i mode only supports HDMI/SDI output. When 1080i
mode is set, NDI output is 1080p
2
Output signal
According to the output resolution, you can select HDMI + streaming
output or HDMI + UVC output
<Remark> When it is set to UVC output, 3840 x 2160 29.97p or lower
resolutions are supported
3
HDMI Format
Select YUV422 / YUV420 / RGB
<Remark> When it is set to YUV420, 3840 x 2160 59.94p and 3840 x
2160 50p resolutions are supported
4
Apply
After the setting has been modified, select this button to apply the
setting
2
1
4
3