Lumens VC-B30UAB - I Would Like to Set the Image Mode; I Would Like to Freeze Images; I Would Like to Rotate the Image; I Would Like to Change the Camera Direction

English - 27
6.10 I would like to set the image mode
1. Press [Picture] on the remote control to switch [Off / Neg / B&W].
6.11 I would like to freeze images
1. Press [Freeze] on the remote control to freeze the current image on
the display.
6.12 I would like to rotate the image
1. Press [Mirror] on the remote control to switch [Off / Mirror / Flip / Mirror
+ Flip].
6.13 I would like to change the camera direction
1. Press [L/R Direction Set] on the remote control to switch [L/R
Direction / Off / Normal].
6.14 I would like to display the current status
1. Press [Info] on the remote control to display the current status
information.
6.15 I would like to reset to the original setting
1. Press [MENU] to activate the setting menu.
2. Press [] or [] to select [System].
3. Press [ENTER] to activate.
4. Press [] or [] to select [Factory Reset].
5. Press [ENTER] to activate.
6. Press [] or [] to select [On].
7. Press [ENTER] to execute.