How to fix Lumiscope 1140 Blood Pressure Monitor with no display?
If your Lumiscope Blood Pressure Monitor shows no display when you press the START key, the batteries may have run down. Replace them with two new alkaline batteries. Also, check if the batteries are positioned incorrectly; re-insert them in the correct positions.
What to do if Lumiscope 1140 Blood Pressure Monitor shows EE mark?
If your Lumiscope Blood Pressure Monitor displays an 'EE' mark or shows blood pressure values that seem excessively low or high, make sure the cuff is placed correctly. Wrap the cuff properly so that it is positioned correctly. Also, avoid talking or moving during the measurement; measure again quietly. If you shook your wrist with the cuff on, take another measurement.
General| Brand | Lumiscope |
|---|---|
| Model | 1140 |
| Category | Blood Pressure Monitor |
| Language | English |
To Next Page
