Lust CDA32.006 - Page 48

4-16
CDA3000 Operation Manual
4 Commissioning
Example of parameter setting
(PARA menu)
• The parameters in the PARA menu are grouped into subject areas
according to their functions, in order to provide a clearer overview.
• Only the parameters to which the current user level permits access
can be changed.
1. Select PARA menu.
2. Select desired subject area with
cursor keys and confirm with
start/enter.
3. Select desired parameter with
cursor keys (user level
1-MODE = 2).
4. The current value is displayed,
with the last character flashing.
Switch to the next character
using the down key. Use the up
key to change the flashing
character. The fifth character at
the extreme left indicates the
preceding sign: (–) = minus.
The last character can be
entered as an exponent.
Save new value with start/enter
or cancel (without saving) with
stop/return.
PARA
PARA
PARA
PARA
start
enter
start
enter
start
enter
stop
return
stop
return
stop
return
start
enter
PARA
0...9