25
Working modes
Frequency mode (VFO)
Using this mode, you can use the
key to toggle between the A and B bands, and then use the
/ keys or the channel selector to change the frequency, or introduce the frequency
number directly through the numeric keyboard, and store the channel.
Frequency-channel mode (MR)
When there is at least one memory channel memorized and being in frequency mode (VFO), press
the
key to enter MR mode.
The frequency will be shown in the display and the channel number will be indicated on the right
side.
When the channel name editing option is on and the channel name is edited, the name of the
channel will be displayed.
Channel mode (CH)
When there is at least one memory memorized, you can operate in CH mode. The channel number
will be shown in the display. Keeping the
key pressed power on the transceiver, and you will
enter the CH mode.
Keeping the
key pressed and powering on again the transceiver, you will exit the CH mode.
To Next Page
Loading...