Luthor TL-60 - Page 27

27
luthortechnologies.com
Nº
Display and
function
Selectable parameters Function’s description
17 ROGER ON / OFF Transmission’s end notice setting
18 DW ON / OFF Dual watch / Monitor setting
19 RX.SAV ON / OFF Reception’s energy save setting
20 SCAN.S TO / CO / SE Signals search mode setting
21 AUTOLK ON / OFF Automatic keyboard lock setting
22 VOICE English / Chinese / OFF English voice guide setting
23 TAIL ON / OFF End of transmission noise elimination
24 OPN.SET OFF / DC / MSG Display information when power on
25 VLT / Shows the battery voltage
26 MSG.SET -1A @ Display message when power on
27 DIS.NM ON / OFF Channel name displaying
28 CH.NAME -1A @ Edition of channel name
29 C-CDC OFF / 67.0 / D023N CTCSS/DCS tones in TX/RX
30 R-CDC OFF / 67.0 / D023N CTCSS/DCS tones in RX
31 T-CDC OFF / 67.0 / D023N CTCSS/DCS tones in TX
32 S-D + / - / OFF Frequency shi direction setting
33 OFFSET 0.00 - 99.975 MHz Frequency shi value
34 STEP 0.5K / 2.5K / 5K / ... / 50K
/ 100K
Frequency steps setting