Lutron Electronics Energi Savr Node QS QSNE-4S10-D User Manual

Contents Page
Out of Box Functionality ............................................2
Programming ............................................................3
Input Programming Mode .........................................3
Sensor Overview ......................................................3
Advanced Button Programming ................................4
Scene Programming Mode .......................................4
QS Link Input(s) Setup ..............................................6
Contact Information ..................................................8
Energi Savr NodeTM QS
Programming Guide
Model: QSNE-4S10-D

Lutron Electronics Energi Savr Node QS QSNE-4S10-D Specifications

General

Brand	Lutron Electronics
Model	Energi Savr Node QS QSNE-4S10-D
Category	Controller
Language	English

Summary

Programming

Input Programming Mode

Mode for assigning zones to sensors; exits automatically after 10 mins of inactivity.

Assign/Unassign Zones to Wired Sensors

Steps to enter programming mode and assign zones to specific sensors.

Sensor Overview

Details on programmable occupancy and daylight sensors.

Advanced Button Programming

Configure Zone Parameters

Steps to adjust zone settings like occupancy response and daylight setpoints.

Scene Programming Mode

Scene Programming

Defines up to 16 scenes plus Off for each zone, controlling On, Off, or unaffected states.

Scenes 1-4

Scenes 5-16