* When the peak value is got, the LCD indicator "
DATA RECORD " will be disappeared . The indicator
will show " PEAK " indicator only, in the same time
the peak value will freeze on the Display
* Following the bottom LCD will show the data record
no. and count down to zero, in the same time all the
memory data will save into the SD memory card.
5-5 Check the time information
During the normal measurement screen ( not execute
the Datalogger ),
1)If press " Time Button " ( 3-8, Fig. 1 ) once , the lower
LCD display will present the time information of
Hour/Minute/Second ( h.m.s ) in the lower Display.
2)If press " Time Button " ( 3-8, Fig. 1 ) once again , the
lower LCD display will present the time information of
Year/Month/Date ( yy.mm.dd ) in the lower Display.
3)If press " Time Button " ( 3-8, Fig. 1 ) once again ,
the LCD will return to normal screen.
5-6 Check sampling time information
During the normal measurement screen ( not execute the
Datalogger ), If press " Sampling Button " ( 3-9, Fig. 1 )
once , the lower LCD display will present the Sampling
time information in second unit.
5-7 SD Card Data structure
1)When the first time, the SD card is used into the meter,
the SD card will generate a route :
FGA01
15
To Next Page
Loading...
