D10 Polarity
0 = Positive 1 = Negative
D9 Decimal Point(DP), position from right to the
left
0 = No DP, 1= 1 DP, 2 = 2 DP, 3 = 3 DP
D8 to D1 Display reading, D1 = LSD, D8 = MSD
For example :
If the display reading is 1234, then D8 to D1 is : 1234
D0 End Word
RS232 FORMAT : 9600, N, 8, 1
Baud rate 9600
Parity No parity
Data bit no. 8 Data bits
Stop bit 1 Stop bit
12. MOUNTING HOLES & OPTIONAL
TEST STAND
FORCE GAUGE is a precise instrument, best results are
obtained when the gauge is fitted to a test stand.
Mounting holes ( 3-13, Fig. 1 ) are provided on the back
of the gauge for easy stand mounting.
Optional Test Stand & accessory :
a.TEST STAND, Model : FS-1001
Test stand, cooperate with Force gauge, whole system
will be become the useful tool for material's tension &
compression analysis.
Size : 630 x 250 x 230 mm. Weight : 7.02 Kg ( 15.4 LB ).
27
To Next Page
Loading...
