Lutron Electronics UVC-254SD - SD Card Data Structure

5-5 Check sampling time information
During the normal measurement ( not execute the
Datalogger ), If press " Sampling Button " ( 3-6, Fig. 1 )
once , the lower LCD display will present the Sampling
time information in second unit.
5-6 SD Card Data structure
1)When the first time, the SD card is used into the meter,
the SD card will generate a folder :
UVC01
2)If the first time to execute the Datalogger,
under the route UVC01\, will generate a new
file name UVC01001.XLS.
After exist the Datalogger, then execute again,
the data will save to the UVC01001.XLS until
Data column reach to 30,000 columns, then
will generate a new file, for example UVC01002.XLS
3)Under the folder UVC01\, if the total files more
than 99 files, will generate anew route, such as
UVC02\ ........
4)The file's route structure :
UVC01\ UVC01001.XLS
UVC01002.XLS
.....................
UVC01099.XLS
UVC02\ UVC02001.XLS
UVC02002.XLS
.....................
UVC02099.XLS
UVCXX\ .....................
Remark :
XX : Max. value is 10.
14