Lutron Electronics vt-8204 - Page 25

2)When finish the measuring procedures ( after release
the operation button ), the memorized values can be
displayed on the LCD display whenever :
a.First push the " REC button " ( 3-4, Fig. 1 ) -
To display the last value ( " LA " and " the last value "
will be displayed alternately ).
b.Second, push the " REC button " again -
To display the maximum value ( " UP " and " the
max. value " will be displayed alternately).
c. Third, push the " REC button " again -
To display the minimum value ( " dn " and " the min.
value " will be displayed alternately ).
23