EasyManua.ls Logo

Lux Power Technology LXP Series - User Manual

Lux Power Technology LXP Series
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
LXP HYBRID INVERTER
USER MANUAL
Version:EN-UM-2.0-03
LXP 3K/3.6K/4K/4.6K/5K/6K Hybrid
LXP 4K/5K/6K HB
LXP 3K/3.6K/4K/4.6K/5K/6K MG
Monitor APP Download
Android
IOS
Standard Model:
Parallel Model:
High Voltage Model:
Question and Answer IconNeed help?

Do you have a question about the Lux Power Technology LXP Series and is the answer not in the manual?

Summary

1. Safety

1.1 Symbol Explanation

Explains symbols used in the manual and on the inverter label.

1.2 Safety Instruction

Provides general safety instructions and important notifications for installation and operation.

2. Brief Introduction

2.1 System Solution

Details various system application diagrams for the hybrid inverter.

3. Installation

3.1 Packaging List & Storing

Lists package contents and provides instructions for storing the inverter.

3.2 Select Location

Offers suggestions and requirements for selecting an optimal installation location.

3.3 Install the Inverter

Provides step-by-step instructions for wall-mounting the inverter.

3.4 Connection

Covers the overall connection process for various system components.

3.4.3 Battery Connection

Explains how to connect the battery to the inverter and communication.

3.4.4 Grid Connection

Provides instructions for connecting the inverter to the grid.

3.4.5 UPS;Back-up Connection

Details the two wiring modes for UPS/back-up connections.

3.4.6 Meter and CT Connection

Explains how to install and connect meters and CT clamps.

3.4.7 Communication Connection

Covers various communication interface overviews.

3.4.7.2 Safety Standard Configuration - SW2

Details configuring DIP switch for various safety standards.

3.4.7.3 Balancing Resistor Configuration - SW1

Explains SW1 configuration for parallel CAN communication.

3.4.7.4 Wireless Communication Module Connection

Describes connecting the Wi-Fi module.

4. Operation Guide

4.1 Operation Mode

Explains different operating modes and their related settings.

4.2 LCD operation and settings

Introduces the LCD menu structure and how to navigate it.

4.2.3 LCD Settings

Introduces the settings section of the LCD menu.

4.2.3.1 Information Searching

Guides on how to search for information through the LCD interface.

4.2.3.2 Settings Guidance

Provides guidance on navigating and setting parameters like time, PV input, UPS, and AC charge.

4.3 Monitor System

4.4 Work with Gen set

4.5 Parallel system setup guidance

5. Start-up and shut down the inverter

5.1 start up the inverter

Step-by-step guide for starting up the inverter.

5.2 Shut down the inverter

Provides instructions for safely shutting down the inverter.

6. Troubleshooting & Maintenance

6.1 Troubleshooting

Introduces troubleshooting procedures and solutions for common faults.

6.1.1 Introduction to LED Displays

Explains the meaning of LED indicators and their status for diagnostics.

6.1.2 Maintenance

Outlines the recommended maintenance schedule for the inverter and battery.

6.1.3 Troubleshooting Based On LCD Displays

Lists common error codes and their corresponding troubleshooting steps.

Lux Power Technology LXP Series Specifications

General IconGeneral
TypeHybrid Inverter
Battery Voltage48V
Max. Efficiency97.6%
TopologyTransformerless
Output Voltage230Vac
ModelLXP Series
Max. DC Input Power6000W
CommunicationRS485, Wi-Fi, GPRS
ProtectionShort Circuit Protection, Over Voltage Protection
Operating Temperature Range-25°C ~ +60°C
Frequency50Hz / 60Hz
MPPT Voltage Range120V-550V
MPPT Range120V-550V

Related product manuals