Need help?Do you have a question about the Luxman C-02 and is the answer not in the manual?
General| Type | Preamplifier |
|---|---|
| Total Harmonic Distortion | 0.005% |
| Frequency Response | 10 Hz - 100 kHz |
| Input Impedance | 100Ω (MC) |
| Output Voltage | 1V (Pre Out) |
| Signal-to-Noise Ratio | 100 dB |
Details the physical locations for calibration adjustments on the pre-amplifier.
Outlines the step-by-step process for performing unit adjustments.
Circuit board layout for the main pre-amplifier section.
Circuit board layout for the tone control section.
Circuit board layouts for Monitor and Function sections.
Circuit board layouts for Volume and Balance sections.
Component list for the Tone Control PCB.
Component list for the Balance Volume PCB.
Component lists for Monitor, Function, and Volume PCBs.
To Next Page
