Need help?Do you have a question about the Luxman CL-38uC and is the answer not in the manual?
Guidance on selecting a suitable location for the unit, emphasizing ventilation and heat radiation.
Importance of not blocking ventilation holes due to heat generated by vacuum tubes.
Explanation of the time muting circuit and advice on volume control.
Recommendation to consult the dealer for repairs and adjustments.
Advice on turning off power before connecting devices and ensuring firm pin-plug connections.
Warnings about the unit's weight, heat during operation, and keeping it away from children/animals.
Explains how to turn the unit on and off and important procedures.
How to select the turnover frequency for bass tone control.
How to select the turnover frequency for treble tone control.
Function of the switch to bypass or activate tone controls.
How to use the low-frequency cutoff function to reduce rumble.
How to select input impedance for MC cartridges.
How to select input devices such as CD players or tuners.
Changes the gain for analog record playback (MM/MC).
Illustrates how to connect CD player, analog player, CD/SACD player, recorder, and power amplifier.
Steps to take before making connections, including power off and cable connection.
Instructions for connecting the power cable to the unit and wall outlet.
How to connect analog players, including ground wire and cartridge settings.
How to connect the unit to a recorder for recording sound sources.
How to connect the unit to a power amplifier using line output terminals.
Ensuring correct connections and setting volume control before operation.
Steps for turning on the unit, selecting sources, and adjusting sound.
Table listing problems, causes, and solutions for common issues.
To Next Page
General
