Need help?Do you have a question about the Luxman CL 35 mk III and is the answer not in the manual?
General| Type | Vacuum Tube Amplifier |
|---|---|
| Output Power | N/A (Preamplifier) |
| Frequency Response | 20 Hz - 20 kHz |
| Tube Complement | 12AX7 x 2 |
| Input Impedance | 100 kOhm |
| Output Impedance | 600 ohms |
Explains the circuit concept, gain, feedback, and input impedance of the Equalizer Amplifier.
Details the RIAA equalization circuit and its role, including microphone amplification capability.
Details the Flat Amp circuit, local feedback, and low-frequency trimmer operation for roll-off and cut-off.
Explains LUX's exclusive NF type tone control and its dependence on tube operation.
Describes the -12dB/oct. filter composed of CR coupling and its frequency dependence on volume setting.
Describes the cathode-follower output amplifier, bias fixing, and noise reduction by high-cut filter.
Details the LC filter attenuating -12dB/oct., with frequency decided by load and impedance.
Explains the direct-coupled pure complementary SEPP configuration for the headphone amplifier.
Describes the operation of the time delay circuit, power supply, bias, and relay functions.
To Next Page
