User Interface Commands
4-20 FOT Lab Kit User’s Manual
SN Serial Number Query
The SN command is used to report the unit's internal serial number.
A copy of this number may or may not also be affixed to the unit's
case.
Information Request:
Syntax: <Esc>SN ? <CRLF>
Response: SN = sernum
Example: SN = 123456
In the unlikely event that the serial number saved in NvRam has
been corrupted the message "SN = Undefined" will be returned.
Parameter Modification
n/a
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...