Need help?Do you have a question about the Luxul AMS-2616P and is the answer not in the manual?
General| PoE+ Ports | 16 |
|---|---|
| PoE Budget | 240W |
| Layer | 2 |
| VLAN Support | Yes |
| QoS Support | Yes |
| Managed | Yes |
| Rack Mountable | Yes |
| MAC Address Table | 8K |
| Power Supply | Internal |
| Input Voltage | 100-240VAC, 50/60 Hz |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| Humidity | 10% to 90% (non-condensing) |
| Weight | 5.5 lbs |
| Ports | 16 x Gigabit RJ45 |
| Dimensions | 17.3 x 1.7 in |
| Jumbo Frame Support | 9K |
Guidance on rack-mounting switches for stability, ventilation, and avoiding damage.
Instructions for connecting Ethernet cables and power to the switch unit.
Procedure for connecting a computer and logging into the switch's web interface.
Setting the switch's IP address, DNS servers, and default gateway.
Interface for configuring PoE settings, including port-specific options.
Methods for setting power reservation: Allocated, Class, or LLDP-MED.
Settings for individual ports: PoE Mode, Priority, and Maximum Power.
Defining the switch's VLAN structure and port assignments.
Creating 802.1Q VLANs and defining access for different port types.
Configuring port-specific VLAN settings, including mode and tagging.
Defining which ports belong to specific Private VLANs.
Enabling or disabling port isolation within VLANs to control inter-port communication.
Configuring core STP parameters like protocol version and bridge priority.
Mapping VLANs to Multiple Spanning Tree Instances (MSTIs).
To Next Page
