Luxul XMS-1008P User Manual

luxul.com
Simply Connected
User Guide
XMS-1008P
Luxul Xen™
Gigabit Ethernet Smart POE Switch
Use the XMS-1008P to:

Combine the Benefi ts of POE with Gigabit Technology
(10X Performance of Fast Ethernet)

Simplify POE Device Installation, While Enhancing
Network Performance

Provide Intuitive Network Management and
Optimization Capabilities

Optimize and Protect Your Network with Advanced VLAN,
QoS and Network Security Features
SWITCH

Luxul XMS-1008P Specifications

General

Brand	Luxul
Model	XMS-1008P
Category	Switch
Language	English

Summary

Product Overview

1.1 Product Introduction

Overview of the Luxul XMS-1008P Gigabit Ethernet Smart POE Switch and its XenSmart management.

1.2 Product Features

Lists key features of the XMS-1008P, including Gigabit Ethernet, POE, and advanced network capabilities.

1.3 Product Specifications

Details technical specifications such as protocols, number of ports, MAC address table, and bandwidth.

1.4 Package Contents

Lists all items included in the XMS-1008P package for user convenience.

Hardware Description

2.1 Front Panel and Network Ports

Details the front panel components, status indicators, RJ45 ports, and SFP expansion ports.

2.2 Rear Panel

Describes the rear panel of the switch, including the AC input socket and power on/off switch.

Installation

3.1 System and Environmental Requirements

Specifies system requirements and environmental conditions for switch operation and installation.

4.1 Installation on Desktop/Shelf

Instructions for placing the switch horizontally on a flat surface using rubber footpads.

4.2 Installation in a Rack

Guide for mounting the switch into a standard 19-inch server or audio rack using L-brackets.

4.3 Network Connections

Details connecting the switch via RJ45 ports and SFP expansion ports for network connectivity.

Configuration

5.1 Login

Steps to access the switch's web-based configuration interface using default credentials.

5.3 Port Settings

Configuration options for port speed, duplex mode, and flow control for optimal network performance.

5.5 POE

Details Power Over Ethernet capabilities, advantages, and configuration for powering network devices.

5.6 VLAN

Configuration for Virtual Local Area Networks to segment the network and improve security.

Regulatory Compliance

6.1 Health and Safety Recommendations

Provides warnings and guidelines for safe usage, power supply, and potential hazards.

6.2 FCC Statement

Details FCC compliance information and measures to correct interference if it occurs.

Contact Luxul

Sales Department

Contact information for sales inquiries, including phone number and email address.

Technical Support

Contact information for technical assistance, including phone number and email address.

Appendix 1: Common Commands

Common Command Line Utilities

Description of essential command-line utilities for network troubleshooting and monitoring.

Appendix 2: TCP/IP Address Setting (Windows XP)

Configuring IP Address in Windows XP

Step-by-step guide to setting static IP addresses for network management in Windows XP.

Glossary

Networking Terminology

Definitions of key networking terms and protocols used throughout the manual.