Luxul XMS-1008P User Manual

luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460
User Guide
35
luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460
3535
MAC Aging Confi guration:

ARL Aging: Check to enable this function or uncheck to disable. It is enabled by
default
NOTE: It is not recommended to disable ARL Aging

Aging Time: Sets the aging time. 300 seconds by default.
NOTE: It is not recommended to have an Aging Time setting greater
than 3600 seconds.
CAUTION: If “ARL Aging” is unchecked, the switch stops learning new
MAC addresses and the addresses in the MAC address table
turn into static MAC entries and are free from aging. This is
not recommended.
5.13.7 Restore Factory Defaults
Restore Factory Defaults: Click “Apply” to restore the factory default
confi guration
CAUTION: Restoring default confi guration will re-set all of your
settings to factory defaults. The switch will now have the
default IP address 192.168.0.3. For login, both default user
name and default password are “admin.”
5.13.8 Backup
Backup Current Settings: Click “Backup” to backup the current switch confi gura-
tion settings to a fi le

Luxul XMS-1008P Specifications

General

Brand	Luxul
Model	XMS-1008P
Category	Switch
Language	English