5.13.2 Change Password
Change Password: Modifi es the password for switch login
Old Password: Enter the old password (Default password is “admin”)
New Password: Enter the new password
Confi rm New Password: Re-enter the new password
NOTE: A password can consist of up to 15 alphanumeric characters.
5.13.3 Power Save
Power Save: Check to enable or uncheck to disable the power save mode
Apply: Enables or disables the power save mode
5.13.4 Upgrade
Firmware Upgrade
Please visit the Luxul website to check for fi rmware upgrades and obtain upgrade
instructions.
1. Go to the Luxul website (www.luxul.com/support) and download the new
version of fi rmware to your computer
2. Click “Browse” to locate the fi rmware fi le on your computer
3. Click “Upgrade” to perform the update
To Next Page
Loading...
Need help?
General
