Need help?Do you have a question about the LXNAV LX905 and is the answer not in the manual?
Core system configuration including QNH, display, files, graphics, and hardware settings.
Covers different navigation pages and their functionalities for flight guidance.
Allows navigation to waypoints from selected files and management.
Manages route creation, editing, and navigation.
Sets map orientation, zoom, and visibility of map elements.
Explains various symbols and indicators on the navigation screen.
Critical setup for accurate final glide calculations.
Procedures for starting, navigating, and finishing routes.
Process for updating the main unit's firmware via SD card/USB.
Procedure to recalibrate the barograph sensor for altitude recording compliance.
Configuration and management of the FLARM collision avoidance system.
To Next Page
General
