LXNAV PowerMouse - Default Chapter; Table of Contents

Rev #17 Version 1.18 November 2019
Page 2 of 22
LXNAV d.o.o. • Kidričeva 24, 3000 Celje, Slovenia • tel +386 592 33 400 fax +386 599 33 522
info@lxnav.com • www.lxnav.com
1 Important Notices 3
1.1 Limited Warranty 3
1.2 Declaration of Conformity 4
1.2.1 FCC 4
1.2.2 CE 5
2 Packing Lists 6
3 Basics 7
3.1 LXNAV PowerMouse at a Glance 7
3.1.1 LXNAV PowerMouse Features 7
3.1.2 Interfaces 7
3.1.3 Flarm antenna color coding 8
3.1.4 Options 8
3.1.5 Technical Data 8
3.2 ADS-B module 8
4 System Description 9
4.1 Switching on the Unit 9
4.2 Normal operation 9
4.3 Bluetooth 9
5 Installation 10
5.1 Connecting LXNAV PowerMouse 10
5.2 Connecting Antennas 10
5.3 USB port 11
5.4 Wiring 11
5.4.1.1 PowerMouse PORT1 and PORT2 pinout (RJ45) 11
5.4.1.2 PowerMouse RF connector side description 11
5.4.1.3 PowerMouse – FlarmView 12
5.4.1.4 PowerMouse – FlarmLED 13
5.4.1.5 PowerMouse – FlarmLED – Oudie 13
5.4.1.6 PowerMouse – FlarmView – Sxxx Vario 14
5.4.1.7 PowerMouse – LX9xxx – FlarmView 14
6 Data transfer 15
6.1 Firmware Update 15
6.1.1 Firmware update via USB port (USB stick) 15
6.1.2 ADS-B firmware update via Flash Loader 15
6.1.3 ADS-B firmware update via LXxxxx 16
6.2 Configuring PowerMouse 16
6.2.1 Configuring PowerMouse settings with PowerFLARM config 16
6.2.2 PowerMouse configuration by using Flarm configuration tool 17
6.3 Saving flight on the USB stick 20
6.4 Updating the obstacle database 20
7 Revision History 22