Lycoming IO-360 Series User Manual

LYCOMING OPERATOR’S MANUAL
SECTION 7
INSTALLATION AND STORAGE
Page
Preparation of Engine for Installation....................................................................................................... 7-1
General.......................................................................................................................................................7-1
Inspection of Engine Mounting ...............................................................................................................7-1
Attaching Engine to Mounts....................................................................................................................7-1
Oil and Fuel Line Connections ................................................................................................................7-1
Propeller Installation................................................................................................................................ 7-2
Preparation of Carburetors and Fuel Injectors for Installation.............................................................7-2
Corrosion Prevention in Engines Installed in Inactive Aircraft.............................................................. 7-2

Lycoming IO-360 Series Specifications

General

Oil System	Wet Sump
Engine Type	Horizontally Opposed, 4-Cylinder, Air Cooled
Displacement	361 cubic inches (5.9 liters)
Bore	5.125 in (130.2 mm)
Stroke	4.375 inches (111.1 mm)
Cooling System	Air Cooled