Lycoming IO-360 Series User Manual

LYCOMING OPERATOR’S MANUAL SECTION 3
O-360 AND ASSOCIATED MODELS OPERATING INSTRUCTIONS
OPERATING CONDITIONS (CONT.)
Fuel Max. *Max.
Cons. Oil Cons. Cyl. Head
Operation RPM HP Gal./Hr. Qts./Hr. Temp.
HIO-360-D Series
Normal Rated 3200 190 ----- .85 500°F (260°C)
Performance Cruise
(75% Rated) 3200 142 12.0 .48 500°F (260°C)
Economy Cruise
(65% Rated) 3200 123 10.0 .41 500°F (260°C)
HIO-360-E Series
Normal Rated 2900 190 ----- .85 500°F (260°C)
Performance Cruise
(75% Rated) 2700 142 11.8 .47 500°F (260°C)
Economy Cruise
(65% Rated) 2700 123 10.0 .41 500°F (260°C)
HIO-360-F Series
Normal Rated 3050 190 ----- .84 500°F (260°C)
Performance Cruise
(75% Rated) 2700 142 11.8 .47 500°F (260°C)
Economy Cruise
(65% Rated) 2700 123 10.0 .46 500°F (260°C)
TIO-360-A Series**
Normal Rated 2700 200 ----- .89 500°F (260°C)
Performance Cruise
(75% Rated) 2450 150 14.0 .50 500°F (260°C)
Economy Cruise
(65% Rated) 2350 130 10.2 .44 500°F (260°C)
TIO-360-C Series**
Normal Rated 2575 210 ----- .70 500°F (260°C)
Performance Cruise
(75% Rated) 2400 157.5 13.2 .53 500°F (260°C)
Economy Cruise
(65% Rated) 2200 136.5 10.2 .46 500°F (260°C)
* - At Bayonet Location  For maximum service life of the engine maintain cylinder head temperature
between 150°F and 400°F during continuous operation.
** - MAXIMUM TURBINE INLET TEMPERATURE 1650°F (898.8°C).
3-15

Lycoming IO-360 Series Specifications

General

Oil System	Wet Sump
Engine Type	Horizontally Opposed, 4-Cylinder, Air Cooled
Displacement	361 cubic inches (5.9 liters)
Bore	5.125 in (130.2 mm)
Stroke	4.375 inches (111.1 mm)
Cooling System	Air Cooled