M-Audio Fast Track User Manual

10  User Guide Fast Track
11 Specifications
Microphone Input
max input level -1.8dBu, min. gain
signal to noise ratio -102dB, A-weighted, min. gain
dynamic range 102dB, A-weighted, min. gain
THD + N 0.003% (-90 dB) @ 1kHz, -1dBFS, min. gain
frequency response 20Hz to 20kHz, -0.3 / +0.1dB, min. gain
gain range 48 dB
input impedance 6K Ohms (balanced)
crosstalk < -105dB, 1kHz, channel-to-channel
phantom power +48V, 10mA max
Guitar Input
max input level +12dBV, min. gain
signal to noise ratio -103dB, A-weighted, min. gain
dynamic range 103dB, A-weighted, min. gain
THD + N 0.005% (-86 dB) @ 1kHz, -1dBFS, min. gain
frequency response 20Hz to 20kHz, -0.2 / +0.1dB, min. gain
gain range 40 dB
input impedance 1M Ohms
crosstalk < -105dB, 1kHz, channel-to-channel
Line Outputs
max output level +2dBV (monitor off), +8dBV (monitor on)
signal to noise ratio -105dB, A-weighted, max. gain
dynamic range 105dB, A-weighted, max. gain
THD + N 0.002% (-94 dB), 1kHz, -1dBFS, max. gain
frequency response 20Hz to 20kHz, -0.2 / +0.1dB, max. gain
output impedance 100 ohms
crosstalk < -110dB, 1kHz, channel-to-channel
Headphone Outputs
max output level +2dBV at THD < 0.007% into 32 ohms
max output power 48 mW per channel into 32 ohms
signal to noise ratio -105dB, A-weighted, max. gain
dynamic range 105dB, A-weighted, max. gain
THD + N 0.007% (-83 dB), 1kHz, -1dBFS, max. gain
frequency response 20Hz to 20kHz, -0.2 / +0.1dB, max. gain
output impedance 33 ohms
crosstalk < -85dB, 1kHz, channel-to-channel, into 32 ohms
headphone impedance 32 to 600 Ohms recommended

M-Audio Fast Track Specifications

General

Phantom Power	Yes
Bus Powered	Yes
Compatibility	Windows, Mac
Channels	2
Sample Rate	48 kHz
Driver	ASIO, Core Audio, WDM