19
LED Control
Click to select what the button’s LED color and effect will be.
• Solid: Keeps the LED as the selected solid color. One
color can be selected from the list of colors.
• Pulse: Activates the pulsing effect, which will
brighten the LEDs and then dim the LEDs. When
Pulse is active, the LEDs will pulse uniformly. You
can select up to a maximum of 4 LED colors to pulse
between. These colors will go in order from 1-4, and
then repeat starting at 1.
• Rainbow: Activates the rainbow effect. The button will color cycle through the entire spectrum of available LED colors.
Selecting Rainbow will allow you to select Default for standard LED brightness, Dark 1 or Dark 2 for darker LED
brightness or Bright 1 or Bright 2 for brighter LED brightness.
Menu Bar
The menu bar has basic functions that allow you to interact with
samples. It contains basic save, save as, open, new, and delete
functions.
1. Update Sample: This works like a standard save function, where changes to the active sample are updated.
2. Save As New Sample: This works like a standard save-as function, showing the sample and changing the name.
3. Import Sample: This enables you to import .wav, .mp3, .wma, and .aif files into the sample editor.
4. Record New Sample: This allows you to record a new file for editing. When recording a new sample, the record
indicator at the top of the app will turn on. The RECORD NEW SAMPLE button will become a STOP RECORDING
button.
5. Remove Sample: This removes the currently active sample from the sample list. This does not delete the sample from
your hard drive.
1 2
3
4
5
To Next Page
Loading...
Need help?
General
