5
Introduction
Thank you for choosing M-Game RGB Dual powered by M-Audio! The M-Game RGB Dual is a powerful audio interface/
mixer/sampler/voice effects box designed for the streaming gamer. Preview samples and voice effects before you stream.
Capture, create, edit, save, and assign samples and voice effects and customize audio routing. Match the onboard RGB
LED colors to your build’s lighting.
Information & Support
For the latest information about this product (documentation, technical specifications, system requirements, compatibility
information, etc.) and product registration, visit m-game.com.
About This User Guide
This manual should help you get familiar with using your M-Game RGB Dual. For consistency, the terminology throughout
is based on M-Game nomenclature. We also used specific formatting to indicate particular topics of significance:
Important/Note/Tip: Important or helpful information on a given topic.
Names of buttons, controls, parameters, settings, and other options are written in bold characters throughout the manual.
Examples: Press this button to switch the Main Control knob.
Connect speakers to the M-Game RGB Dual’s Main Out.
Connect media player to the M-Game RGB Dual’s Aux In.
Some parts of this manual refer to other relevant chapters or sections, which are cited in bold, italic blue characters. Click
the text to skip immediately to that section.
Examples: See the connection diagrams in the Hardware Setup section for more details.
Use the M-Game software to change the LED behavior of this button seen in the Microphone Settings
section.
Software Download and Installation
1. Before connecting M-Game RGB Dual to your computer(s), first download and install the M-Game software (Windows
10, 64 bit minimum supported, and macOS 10.15 minimum supported) to any computer that will be connected to
M-Game RGB Dual using the link on the software download card. For the latest driver compatibility details and app
support, please visit m-game.com.
2. Open the files you downloaded and double-click the installer file.
3. Follow the on-screen instructions to install the M-Game software, and connect M-Game RGB Dual's Stream USB port
to your computer. If you are using a 2-computer setup, connect M-Game RGB Dual's Stream USB port to your
Streaming computer and the M-Game RGB Dual's Game USB port to your gaming computer.
IMPORTANT: The M-Game software installer package installs the M-Game audio driver to your PC/macOS. If using a dual
PC/macOS setup, any computer that will be connected to the M-Game RGB Dual will need to have the M-Game software
installed.
To Next Page
Loading...
