Chapter 3: Using Venom Standalone
13
Venom User Guide
Chapter 3: Using Venom Standalone
Making Connections
This chapter covers the various hardware connections when setting up Venom.
1 Connect Venom to an AC outlet using the 9V power supply (included).
2 Connect the Main Outputs to either powered monitors, a mixer, or amplifier. You can also connect head-
phones to the front panel headphone jack.
3 Turn the Master Volume all the way down.
4 Set the back panel power switch to the “on” position.
5 Set the Master Volume knob to a reasonable level and turn up the Synth Volume knob.
For additional performance control, you can also connect a sustain pedal and an expression pedal.
Figure 4. Essential connections for using Venom as a standalone synthesizer
To Next Page
Loading...
