M-Audio Venom

Chapter 4: Using Venom with USB
29
Venom User Guide
Configuring Venom on Windows
Windows XP
To configure Windows XP to use Venom as the audio input and output device for your computer:
1 From the Start menu, choose Control Panel.
2 Double-click Sounds and Audio Devices.
3 Click the Audio tab.
4 From the Sound Playback Default Device pop-up menu, select Venom Out 1/2.
5 From the Sound Recording Default Device pop-up menu, select Venom In 1/2.
To use Venom for system MIDI playback from your computer (Windows XP only):
1 From the Start menu, choose Control Panel.
2 Double-click Sounds and Audio Devices.
3 Click the Audio tab.
4 Select one of the following from the MIDI Music Default Device pop-up menu:
• Venom Synth Out—system MIDI plays back using the Venom synthesizer.
5 Venom MIDI Out—system MIDI plays back through the Venom MIDI Out port.
Windows Vista and Windows 7
To configure Windows Vista or Windows 7 to use Venom as the audio input and output device for your computer:
1 From the Start menu, choose Control Panel.
2 When viewing the control panel as icons, click Sound.
3 On the Playback tab, click to select Venom and then click Set Default.
4 Click the Recording tab; click to select the Venom, and then click Set Default.
Refer to your DAW documentation for information about additional configuration that maybe required.
Refer to your DAW documentation for information about additional configuration that maybe required.