Chapter 5: Advanced Synthesizer and Effects Editing
46
Venom User Guide
Mix Controls
The Mix section provides controls for mixing the relative volumes of the three oscillators, the amount of Ring
Modulation of Oscillator 2 on Oscillator 1, and also any external input into Venom (such as a Microphone or
Instrument) before the signal is fed into the Venom Filter.
Osc1 Determines the level of Oscillator 1 that is mixed with other Pre-Filter audio sources and sent to the filter.
The Mix Level for Oscillator 1 can be edited using MIDI CC 56.
Osc2 Determines the level of Oscillator 2 that is mixed with other Pre-Filter audio sources and sent to the filter.
The Mix Level for Oscillator 2 can be edited using MIDI CC 57.
Osc3 Determines the level of Oscillator 3 that is mixed with other Pre-Filter audio sources and sent to the filter.
The Mix Level for Oscillator 3 can be edited using MIDI CC 58.
Ring Determines the level of Ring Modulation that is mixed with other Pre-Filter audio sources and sent to the
filter. The inputs to the Ring Modulator are Oscillators 1 and 2, which are tapped before the Oscillator Level
parameters. Adjust the amount of ring modulation from the top-panel control or using MIDI CC 51.
External Determines the level of the selected External Audio Input (such as a Microphone or Instrument con-
nected to the Venom back-panel inputs) that is mixed with other Pre-Filter audio sources and sent to the filter.
The Mix Level for External Audio Input can be edited using MIDI CC 54.
External Source Determines which physical input source (0 = None, 1 = Mic/Aux Left, 2 = Line/Aux Right, 3 =
Analog Both, 4 = USB Left, 5 = USB Right, and 6 = USB Both) is routed to the External Audio Input level con-
trol. The External Audio Input Source can be edited using MIDI CC 55.
Mix controls
To Next Page
Loading...
