Chapter 5: Advanced Synthesizer and Effects Editing
63
Venom User Guide
LFO
Rate Sets the LFO speed for the effect.
Depth Sets the amount of LFO modulation for the effect.
Arp
The Arpeggiator controls determine how the Arpeggiator performs for the currently selected Single Program.
Arp Source
The Single Program Arpeggiator lets you select Single (S) or Pattern (P) to use either the arpeggiator settings
stored with the pattern or those stored with the Single Program.
S (Single) When selected, the Multi Part uses the Arpeggiator settings stored with the referenced Single Pro-
gram. When Single (S), is selected, all Single Program Arpeggiator controls are available. Select this option
when you want this Single Program to play back with these arpeggiator settings every time it is recalled from
memory.
P (Pattern) Lets you select any available stored Pattern Bank and Program Number. When Pattern (P) is selected,
the selected Pattern overrides the settings stored with the referenced Single Program. When editing Pattern pa-
rameter controls, you are editing the settings for the selected Pattern (which may be referenced by any num-
ber of Single Programs or Multi Parts. Select this option when you want to change the Arpeggiator pattern it-
self so that the pattern plays this way each time it recalled, regardless of which Single or Multi Program is
being used.
Pattern Select Controls and Arpeggiator Settings
Bank Lets you select either Pattern Bank A or Bank B.
Program Number Lets you select the pattern program number.
On/Off Lets you enable or disable the Arpeggiator.
Mode Selects the Arpeggiator type (Standard, Phrase, or Drum) and determines the manner in which the pattern
data is played back.
Single Edit, Arpeggiator controls
Arpeggiator source controls, Pattern selected
Pattern Select and Arpeggiator settings
To Next Page
Loading...
