M-Audio Venom

Chapter 5: Advanced Synthesizer and Effects Editing
75
Venom User Guide
The Multi Part Arpeggiator controls let you select M (Use Multi Data), S (Use Single Data), or P (Use Pattern Data)
for the selected Multi Part Arpeggiator.
M (Use Multi Data) Lets you specify the Arpeggiator parameters for the selected Multi Part. When Use Multi Data
is selected, the Multi Part settings override the settings stored with the referenced Single Program.
S (Use Single Data) When selected, the Multi Part uses the Arpeggiator settings stored with the referenced Sin-
gle Program. When Use Single Data, is selected, only the Enable control is available.
P (Use Pattern Data) Lets you select any available stored Pattern Bank and Program Number. When Use Pattern
Data is selected, the selected Pattern overrides the settings stored with the referenced Single Program. When
Use Pattern Data, is selected, only the Bank, Program Number, and Enable controls are available.
AUX Page
The AUX page of the Multi Program Editor provides access to the Auxiliary Effects 1 and 2 controls, and the
Master EQ and Volume for the selected Venom Multi Program. It also provides Multi Program File notes.
M (Use Multi Settings) Overrides the referenced Single Program Auxiliary Effects and Master settings and uses
the Multi Part settings.
1–4 (Use Single Settings) Uses the referenced Single Program settings for Multi Part 1, 2, 3, or 4 and disables the
Multi Part settings.
AUX FX 1
The Aux FX 1 controls provide access to the controls for Auxiliary Effect 1 (see “Aux FX 1” on page 60).
Multi Editor, AUX page controls