23
the Alpha Dial. SPP will move to the de-
sired point, and pressing Enter will move
to that point.
Below the SPP are the time indicators:
time elapsed from the beginning, time to
the end of the song.
The running Playlist, if any, is described
under the indicators. Otherwise this line
is blank.
On the right are the Vu Meters that report
the levels of the Output outputs: be care-
ful if the volume potentiometer is at zero
these vu meters are not active.
NEXT:NEXT: indicates the Song that will follow
the current one. The Next song can be
freely selected, or it can be the Song in
the playlist if we are using a Playlist or
Show. To the right of NEXT the word MAN
indicates that Play next will have to be
done manually, either by pressing PLAY or
by pressing the Start/Stop Pedal if pres-
ent.
This screen allows you to check the Play-
er's status and perform some actions:
STOP: STOP: if pressed once the running project
will be set to Pause. If pressed a second
time the project will go to TOP. If press-
ing Stop the third time, the memory will
be emptied and it will go to the Playlist
screen.
PLAY: activates playback of the current
project. If the key flashes Blue means
the project is paused, press Play to con-
tinue. When the Play key flashes quickly,
it means a Song is loaded into memory,
ready for Play.
ALPHA DIAL: ALPHA DIAL: by turning the alpha dial the
song position moves along the Time line of
the project loaded in memory, the display
shows the target song position (GO TO)
in minutes and seconds. By pressing enter
the performance starts from the chosen
Song Position. This can happen even while
the project is running.
If a PLAYLIST is loaded, this icon appears
on the Player screen:
The playlist is playing, and when you press
the ENTER key, you will go directly to the
list of projects contained in the Playlist.
From here you will be able to perform
some Playlist selection and editing ac-
tions. See PLAYLIST chapter.
Function keys on the PLAYER screen:
1.SKIP (F1)1.SKIP (F1) allows you to "skip" or in tech-
nical terms skipping the Backing Tracks
that appear in the "Next" field. The "Next"
field indicates which is the title that will
be played after the Backing Tracks being
played; if the Next field is blank (---), it
means that there will be no Projects to be
played at the end of the current run.
2.VIDEO (F2)2.VIDEO (F2) if Backing Tracks and a video
are running we can access the manage-
ment of the video without affecting the
Play of the musical Backing Tracks. Press-
ing F2 VIDEO opens a screen that allows
controlling Stop and Play of the running
video.
To Next Page
Loading...
