HIFACE EVO TWO
UNIVERSAL D-TO-D CONVERTER
REVISION P
R
A – AUGUST 2015
Copyright © 2015, M2Tech Srl
22
www.m2tech.biz
•
BACK: go to level 1;
•
ON: the sample rate converter is enabled on the S/PDIF input: on all
HIFACE Evo
Two
outputs, the audio signal applied to the S/PDIF input (when this input is
selected) will be delivered with the sampling rate chosen by the “arrow left” e “arrow
right” buttons of the remote;
•
BYPASS: the sample rate converter is not active: on all
HIFACE Evo Two
digital
audio outputs the audio signal applied to the S/PDIF input (when this input is
selected) will be delivered with its original sampling rate.
8.4. Menu exit (EXIT)
The menu is terminated when this item is selected. As already stated, the menu
automatically exits after a few seconds idle.
To Next Page
Loading...
