HIFACE EVO TWO
UNIVERSAL D-TO-D CONVERTER
REVISION P
R
A – AUGUST 2015
Copyright © 2015, M2Tech Srl
9
Figure 1
1) Display.
It shows the operation information (sampling frequency, selected input, etc.).
Moreover, it shows all active options (See Chap. 7).
2) Remote control IR receiver.
Aim the remote at this point to send command to the
device.
NOTE: the remote control provided with the
HIFACE EVO TWO
is the same used for the
JOPLIN
and
JOPLIN MKII
. For this reason, whenever the user owns both units, it may happen
that a command sent to one of them will also affect the other. To avoid interferences, place
the two units apart each other or keep the unused unit off.
To Next Page
Loading...
