To Next PageTo Next Page
Need help?Do you have a question about the MAAX 836272 and is the answer not in the manual?
General| Material | Acrylic |
|---|---|
| Shape | Rectangular |
| Color | White |
| Warranty | Limited Lifetime |
| Dimensions | 60" L x 32" W x 19" H |
Identifies the shower door model and product name for installation.
Record serial number and save the guide for future reference.
Comprehensive list of all components included in the shower door kit.
List of tools necessary for the proper installation of the shower door.
Measure enclosure, check studs, and prepare walls before starting.
Cut and place the threshold based on wall angle and measurements.
Prepare threshold corners, especially for rounded wall angles.
Measure distance, mark threshold center, and apply silicone sealant.
Install bumpers and wall jambs according to specific placement instructions.
Secure wall jambs by drilling and fastening them to walls and bumpers.
Temporarily position, drill, and fasten header supports to wall jambs.
Measure header length and install drip shields on the shower doors.
Insert rollers, caps, slide header into supports, and attach covers.
Insert the door side gaskets into the wall jambs.
Fasten header set screws and ensure proper leveling with shims.
Slide the header support covers into place after roller disassembly.
Position bumpers, drill, fasten, and insert screw covers for final assembly.
Mount inside and outside panels onto roller brackets and reassemble rollers.
Adjust eccentric nuts to level doors and insert screw covers.
Attach handles, insert gaskets, and apply silicone sealant.
Wait 24 hours after installation before using the shower.
Details the express limited warranty for MAAX shower doors and glass panels.
