MAAX Utile - Distinct; Zone Square Base Installation

10
Lift the base. Insert wood shims on the oor around the
outline of the base on the previously marked spots to
compensate leveling.
Lower the base and validate leveling and the stability of
the base on the oor. If needed, use additional shims.
2
STEP Installing the base (cont'd)
Distinct / Zone Square
2.4
Check me!
COMPATIBLE BASES No.
Distinct 4832 106350
Zone square 4832 106351
Zone square 6032 106352 - 106353
Leveling the base is critical
for wall alignment
Verify the base leveling. Mark the studs and the oor
where shims will be required to perfectly level the base.
If the base is completely leveled go to step 2.5
2.3
Check me!
13