10
drain hose
The drainage of the machine should be smooth and fluid.
The height of the drain hose when placed down on the floor
should be less than 10 cm, or the drainage will not be smooth
enough causing an incomplete drainage.
Do not step on or crush the drain hose.
If the extra section of the drain hose is too long, you can cut it at ei-
ther point indicated "A" or "B".
Once the washing or rinsing process is completed, and you need
to flush the water, it is necessary to place the drain hose on the
floor at a height not greater than 10 cm, and turn the control
panel knob to the function “Drained”.
To Next Page
Loading...
