17
Outer cover
of spinning tub
Inner cover
of spinning tub
Press down
the spinning
tub plate
Correct
position
Load is
not level
Press down
Correct Without
spinning
tub plate
spin
1. Evenly load the items into de spin tub.
2. Spin the load.
Properly place the spinning tub plate on the load, even when the
load is small.
3. Close the inner and outer covers of the spinning tub.
4. Spin the load for 1-2 minutes.
foam-removing spinning
1. Place the water inlet selector at the SPIN position. Let the water
into the spinning tub for about 1 minute. If the water quantity is
too large, then it may flow out to the wash tub side. Please regu-
late the water supply tap to limit water filling.
2. Close the outer cover of the spin tub and set a spinning time of 1
or 2 minutes.
wash spin
To Next Page
Loading...
Need help?
General
