16
washing sequence
1. Fill selection. Set the water inlet selector
to WASH. Adjust water level rod to a
position as needed.
2. Let water into the tub and add dissolved
powder detergent until water reaches a
suitable level. It begins to wash and
dispense detergent evenly.
3. Add the wash load, and supply water if
necessary.
4. Select the proper WASH PROGRAM
according to the load.
5. Select the WASH TIME according to the
load.
6. After washing, set the WASH PROGRAM
SELECTOR to DRAIN.
soft
wash time
wash program
wash program
soft
To Next Page
Loading...
Need help?
General
