14
washing sequence
1. Water Inlet Selector. Set the selector to
the WASH setting.
2. Add water. Let the water enter the
washer tub. Add the diluted detergent
and make sure the water level reaches
the desired level.
3. Add the wash load into the tub. Add
more water as necessary.
4. Select the washing intensity. Select
SOFT or NORMAL washing intensity
according to the type of load.
5. Select the washing time according to
the load.
6. After the wash cycle is completed, set
the Water Inlet Selector to the DRAIN
position.
soft
wash time
wash program
To Next Page
Loading...
Need help?
General
